Radiant DVMD1 Manual de usuario descargar pdf (Pagina 73)

Science Manual – Using Video Images for Fisheries Monitoring 65

5. Curing time is 20 hours at 25°C and one hour at 100°C. Thus, the compound

curing time is heat-accelerated. A heat gun was used set at 500°C to achieve

an approximate surface temper of 80-100°C. Using the heat gun also had the

effect of dispersing the trapped air bubbles. This was done for approximately

one hour, holding the heat gun six to eight inches above the compound.

6. Offer the LED strips onto the semi-cured compound.

7. Mix a further 11 litres of compound and pour into the box. This should fill the

box completely. Allow to set naturally or accelerate.

1 2 ... 68 69 70 71 72 73 74 75

Sin comentarios

Radiant DVMD1 Manual de usuario Pagina 73